997 'upgrade' !

[robert997]

For 997's with a manual gearbox, an 'upgrade' is now available. I had a call from my local OPC on Friday, and have been-in already as it doesn't take long.

It would seem that the gearbox cable can become kinked on entry to the 'box, making it difficult to engage a gear (first on mine) and in theory premature wear. The upgrade is to straighten the cable and fit a retaining bracket. I asked the guys to take before and after pics which I'll post here as soon as...

There isn't a recall as it's not a safety issue, but like the creaking suspension it may effect some cars.

You heard it here first ! (I hope!)

 

[Geoff_Fields]

Is this a no cost upgrade? If so, then perhaps prevention is better than cure.

 

[robert997]

Yes it is a free one ! Workshop campaign W557 according to the paper-work.

 

[mbrands]

Sounds like my car has the same problem with selecting first. I'll be calling my OPC tomorrow. Thanks for letting us know.

 

[johnag007]

Does this also affect short shift cars?

 

[Geoff_Fields]

If the problem is the cable at the gearbox end then that must yes.

 

[robert997]

Just collected mine today as been away, and it is a noticeable improvement, even on the frosty morning start. Well worth having-done. Still no pics but the workshop campaign states this affects all 2005 model year up-to 2006, and then refers to chassis numbers on a 'dealer notication list' of which I don't have a copy ![&:]

 

[YvesD]

Is that to say all cars built in 2005 ? Mine is a 2006 model year car, built late July.

Haven't noticed any issues with the gear change to date.

 

[pvernham]

Rob

Did they do the modification while you waited for the car or did you have to leave it with them for the day?

Paul

 

[robert997]

Hi Paul, they can do it while you wait, takes 30-60 minutes apparently. I left mine as I went away on business. Probably best give them a call quote your chassis number and they'll be able to look-up if you need to come down...

Yves, welcome to the club and the 997 register ! I doubt that such a new car will need the work, but you can always ring the service manager and check. Drop me a line at 997@porscheclubgb.com and I'll forward a registration form and welcome letter since I've not had your details from the club office yet...

 

[YvesD]

Just sent you an e.mail

 

[robert997]

Before and After pics !

 

[robert997]

And After...

 

[Geoff_Fields]

My February 2005 manufactured car did not need this mod. But it does need campaign number W556, which is replacing front lid catch securing screws with a different type? Task takes 0.06 hr! about 3.6 minutes. Talk about time and motion.

 

[Michael Downing]

ORIGINAL: princer2
And After...

Rob - you're not the guy who does the photos for Haynes manuals, are you? You've captured their style perfectly - I haven't a clue where on the car those bits are!

 

[Geoff_Fields]

Crawl under your car between the rear wheels, you soon will.