Guest
New member
You may have seen my article in July's Porsche Post regarding the Strosek bodykit that I have fitted to my S2. With a bit of luck you may have also read the article in 911 & Porsche World about dp Motorsport and their origins in building the Kremer and Joest Le Mans cars.
As a result of fitting my Strosek bodykit, Patrick Zimmerman (who also runs a 944) of dp Motorsport decided that their product range should include something similar and so has come up with the bodykit that can be seen by going to http://www.titanic.co.uk/cgi-bin/galleryindex.py?intReqGall=2
The register has been offered a complete bodykit by dp Motorsport at quite a substantial reduction as a one-off show special for the Brands Hatch meet later this month. I will be taking the kit to Brands to sell, but if anyone would like to pre-empt this, then please contact me off forum. The cost is Euro600 (£396-ish) for the kit (splitter & skirts) a saving of over Euro350. Please note that this must be sold as a complete kit. My address is m.cockram@t-online.de
The splitter is a direct replacement for the existing undertray and the side-skirts can be glued (as are mine) or riveted on.
Please note it will only fit the Turbo or S2 model.
Martyn Cockram
As a result of fitting my Strosek bodykit, Patrick Zimmerman (who also runs a 944) of dp Motorsport decided that their product range should include something similar and so has come up with the bodykit that can be seen by going to http://www.titanic.co.uk/cgi-bin/galleryindex.py?intReqGall=2
The register has been offered a complete bodykit by dp Motorsport at quite a substantial reduction as a one-off show special for the Brands Hatch meet later this month. I will be taking the kit to Brands to sell, but if anyone would like to pre-empt this, then please contact me off forum. The cost is Euro600 (£396-ish) for the kit (splitter & skirts) a saving of over Euro350. Please note that this must be sold as a complete kit. My address is m.cockram@t-online.de
The splitter is a direct replacement for the existing undertray and the side-skirts can be glued (as are mine) or riveted on.
Please note it will only fit the Turbo or S2 model.
Martyn Cockram
