My 1987 911 3.2 carrera is currently undergoing some restoration.
I have also taken the opportunity to have damage to the drivers leather seat restitched. The seats have been removed from the vehicle. The electrics and seat runners are still attached to the underside of the seat and the upholsterer needs this removed from the seat to allow access to the leather seat cover fixings. He is reluctant to start removing the electrics and runners from the underside of the seat without some guidance.
I have removed some fixing bolts from the underside, but it is not clear how to remove all the metalwork.
Does anyone have any experience of doing this, and if so I would appreciate some advice.
thanks in advance
Colin McCashey
I have also taken the opportunity to have damage to the drivers leather seat restitched. The seats have been removed from the vehicle. The electrics and seat runners are still attached to the underside of the seat and the upholsterer needs this removed from the seat to allow access to the leather seat cover fixings. He is reluctant to start removing the electrics and runners from the underside of the seat without some guidance.
I have removed some fixing bolts from the underside, but it is not clear how to remove all the metalwork.
Does anyone have any experience of doing this, and if so I would appreciate some advice.
thanks in advance
Colin McCashey