Goodridge s/s brake pipes in 1984 944

[Paul Fraser]

Anyone done this?
I had a look behind both the front and back wheels and I don't think the set that Design911 sent me (the correct one listed on the Goodridge website SPR600, for Porsche 944, 82-on) will actually fit. Either that or I'm to dense to see what part of the brake system they are suuposed to be attached to (I had thought between the caliper and the the junction first stop on the way back through the system).
Anyone done this and have any pix?

 

[Fen]

I don't know specifically what the early 944 is like but on the Turbo and S2 the caliper has a hard pipe (to aid cooling) that runs to a bracket on the strut (IIRC), and the flexi line runs from there to a bracket on the body.

 

[Super_Marv]

I know on a 968 the braided hose at the front go into the back of the caliper, but as fen says, the calipers at the rear of the car have a hard metal pipe which goes into the caliper, and the braided hose goes in further up the line - it's hard to see unless you really get underneath the car....This is the setup on my 968 at least.

Would love to take some pics, but the car isnt with me at the moment!