HELP - HARNESS CLIPS FROM WHERE??

[jason]

Guys - dupe thread from 964RS but thought you might be able to help also...?

I've finally received my blue Sabelt 6 point driver side and 4 point passenger harnesses.

As they are not new and were previously connected to a roll bar I am missing 4 clips to connect them to the eye bolts I have had fitted in the rear seat well area.

They are 3" wide.

Anyone know where I can get 4???? I've looked on demon thieves, GPR and just about everywhere else on t'internet but with no joy tonight....

Jason

 

[sambaman]

I MAY HAVE SOME SPARE ..... , I BOUGHT SOME SCHROTH AND FITTED MINE TO CAGE HENCE I MAY HAVE SPARE, GIVE ME A CALL AND I WILL HAVE A LOOK

KEITH 07739009029

 

[sambaman]

JASON, just been to the garage , i got 4 but the hole where the belt fits through is 2 inch across , any good ??

keith

 

[paulr]

ORIGINAL: sambaman

I MAY HAVE SOME SPARE ..... , I BOUGHT SOME SCHROTH AND FITTED MINE TO CAGE HENCE I MAY HAVE SPARE, GIVE ME A CALL AND I WILL HAVE A LOOK

KEITH 07739009029

Spooky, I've done the same, def. got 4.....Newark!

 

[jason]

Keith - will you have a look for me please - you can mail me through the site if you have.

What about the ones in yellow peril - surely you don't need them, I mean whats the worst that could happen, it dumps oil all over the track and you go spinning off or something????[]

At least you were with all the right people when it happened! Glad you got back on track and were able to enjoy some of the day....the sun even came out in the end

 

[jason]

ORIGINAL: sambaman

JASON, just been to the garage , i got 4 but the hole where the belt fits through is 2 inch across , any good ??

keith

Now I'm getting confused - I've got some 2" ones - surely these are for 2" wide belts?????

 

[sambaman]

my schroth harness's are wider than 2" , jason im gonna have to go back to garage , bloody porsche owners !!

call me now if u like 07739009029

 

[jason]

ORIGINAL: paulr


Spooky, I've done the same, def. got 4.....Newark!

Paul are you saying you are in Newark?????

If you are and you can put your hands on them quickly would be fantastic - I'm at Newark station tomorrow collecting someone from London who is buying the Mrs's car!!!!

 

[sambaman]

jason if yah get stuck , my belts are 3" wide, clips are 2" and they fit , they are the ones that came with the schroth harness's , let me know how yah get on , keith

 

[jason]

Keith - thanks - I've just taken one OMP set and one Luke set out and they are both 2" wide with 2" clips? I'll have a look at the clips with it but feel they are going to be too narrow - thanks for the offer though mate.

Paul - what width are yours (Ooer)????

 

[sambaman]

your welcome, keith

 

[paulr]

2", I think its a std size, I've had 5 sets of 3" belts, all with 2" fittings. Yep all my spare parts are at Newark,

Paul 07 768 768 320

 

[paulr]

Jason, got your email, but cant reply (my end fault)

Rose & Riley Ltd
Brunel Drive
Newark Ind. Est.

01636 682828 or mobile above

 

[jason]

OK - thanks guys - pretty sure ive got some 2" clips so I'll give them a try first....might come back to you though[]

Question of today therefore is how do you get a 3" belt through a 2" hole.....

Thanks for your help.

J

 

[paulr]

Fold th sides over 1/2", needs to be on the inside of the loop