High revving at start

[unclewinks]

Question for any techies out there
Intermittant fault,No fault recorded
Problem is when starting sometimes the engine will rev to around 3-4000rpm
then settle back to normal.
Any idea's
OPC Exeter check the butterfly motion on the intake today,everything ok
Paul

 

[Alex L]

Normal. No idea why it occasionally happens but no ill effects.

 

[unclewinks]

Thanks Alex,put my mind at ease
I was a bit concerned as it normally when cold
Paul

 

[Jamesec]

I get it too, and presumed it was normal. I didn't get it on my 996 turbo, so presume it's a new setting. You do get the odd funny look in the car park when firing up cos' it sounds like you're revving like a 17 year old in an Impreza! []

 

[unclewinks]

100%[]
Shall notify opc as they wanted the feed back for future reference
Thanks guys
Oh found the colour of the wheels Meteor grey,but since found the 991 comes with black steel bolts
which don't rust,around £150 for full set inc.lock nuts not bad price

 

[Oggy]

Mine does it too...I feel better now also as thought it was a fault on my car []

 

[garyw]

ORIGINAL: unclewinks
but since found the 991 comes with black steel bolts
which don't rust,around £150 for full set inc.lock nuts not bad price

At least they have finally got that sorted then....
Used to be so many complaints about rusty nuts...

I'll check if my wheels look the same as my car... [] -ie dirty []

 

[marlin]

ORIGINAL: garyw

ORIGINAL: unclewinks
but since found the 991 comes with black steel bolts
which don't rust,around £150 for full set inc.lock nuts not bad price

At least they have finally got that sorted then....
Used to be so many complaints about rusty nuts...

I'll check if my wheels look the same as my car... [] -ie dirty []

When you get to my age, the last thing you worry about is your nuts going rusty []

 

[unclewinks]

I think Tanya would have something to say if mine went rusty[]

 

[Oggy]

She might say they need oiling...[]