Inner Door Sill Strips

[MartinRS2K]

Next project possibly [8|]

JCT600 fitted these to their cars around 10 years ago as a marketing campaign. Would there be any interest in getting them re made but also changing the garage name and locations if required (or even putting different text on them)?

These would be made in the same thick vinyl in matt/satin black with white text.

I haven't looked at pricing yet, just gauging interest []

 

[TTM]

Could you make a set with the mention "beware of horses" ?

 

[MartinRS2K]

ORIGINAL: TTM

Could you make a set with the mention "beware of horses" ?

Within reason I can get printed whatever you want on them []

 

[T3rra]

Iv always liked these.

 

[pauljmcnulty]

Wouldn't they be better if they came over the lip? That's the bit that gets scuffed/chipped over time.

 

[MartinRS2K]

ORIGINAL: pauljmcnulty

Wouldn't they be better if they came over the lip? That's the bit that gets scuffed/chipped over time.

Hi Paul

The originals are 45mm deep, but if someone wants them made deeper to go over the lip then that shouldn't be a problem []

Martin

 

[944 man]

:thumb: []

 

[Hilux]

My old 944T had these..........

Dunno if they were standard as I don't recall seeing them on another 944.

 

[MartinRS2K]

Hi Paul

They look good []

That's another option, you could also have Turbo S, 944 Turbo, 944 S2 or similar

 

[pauljmcnulty]

I'm sure Rick Cannel used to do them.

These are what I have. They do protect the vulnerable edge as people with steel-capped work boots climb out of the driver's seat....[&:]

 

[MartinRS2K]

Was looking at vinyl ones as a few people already have the metal ones and would prefer vinyl, but each to their own taste []

 

[papamantra]

I like the idea of a set that bend over the lip and cover up the scruffy edges

Count me in if you make some.

 

[Andy 944]

Martin - I would be interested, just a simple door strip with perhaps 944 and Porsche Logo, keep me posted.

Thanks

 

[scam75]

Quite fancy just the turbo logo like Paul's old ones.

Stuart

 

[frankydoom]

Hi
Depending on costs etc - I be in - also with a lip. ;-) ....
Frank

 

[amrbose14]

Another vote from me for something with a lip to hide the scruffy bits...

 

[PAUL RUDDY]

Mines already got JCT600 ones []

 

[MartinRS2K]

These are working out a bit more expensive than I first thought.

Price is as follows :

10 sets ordered : £50
15 sets ordered : £46

Plus postage at cost

 

[Worsey]

I'll have some (can't see a pic at work but would like some anyway).

Haven't forgotten I need to pm you re number plate surrounds either[]

 

[MartinRS2K]

Ok I'll start the list, we need 10 sets minimum for this to happen

1. Martin
2. Worsey
3. Mark - Longmile
4. Simon Endsor
5. Marks2ply
6.
7.
8.
9.
10.