Lower door seal fitted or not?

[cococola]

I have these chrome porsche protection trims that are fitted on the sill step when you open the doors and I notice that you can just about see the chrome edge when the door is shut(from a distance).
If anybody has these I would appreciate a comparison and if there is perhaps a lower door seal that might be missing maybe?
Thank you.

 

[Alpine]

I have these. I wondered whether they were standard or aftermarket fit. Mine just sit flat on the top of the cill so no chance of seeing them when the door is closed.

 

[pauljmcnulty]

I've got the same trims.

I can't see how you would notice them in the gap between the door and the cill unless either they stick out of the gap, or you lie down with a torch and peer into the gap?

 

[944Turbo]

I had the shaped stainless ones on my lux and it annoyed me I could see them from a distance, have flat carbon ones on the turbo so they are almost invisible, they do not offer as much protection though,
Tony

 

[cococola]

These are the type that I have that sit flat on the door opening sill and have a lip that curves down the edge of the sill.I can just see a chrome strip at various angles

ORIGINAL: 944Turbo

I had the shaped stainless ones on my lux and it annoyed me I could see them from a distance, have flat carbon ones on the turbo so they are almost invisible, they do not offer as much protection though,
Tony

 

[millview]

Don't quite understand your problem, if your sill trims are something like this,
how can they be seen when the doors are closed?

 

[cococola]

These are similar style fitting and you do see the lipped edge from standing back from the car.They dont stick out like a sore thumb its just that I can see the chrome.

ORIGINAL: millview

Don't quite understand your problem, if your sill trims are something like this,
how can they be seen when the doors are closed?

 

[homesea]

944turbo, where did you get carbon ones from? Are they just the carbon look sheets cut to fit?

 

[944Turbo]

A company called fiberlyte that when I just googled for the details appears to have ceased trading.
Tony

 

[homesea]

Think I might make some from Twintex as it doesn't scratch easily and on a black car won't be right in your face like alloy (or be seen when doors are closed [X(]).

 

[944Turbo]

I see Rick has some that also wont show on his site just over half way down the page http://www.highgatehouse.co.uk/944.htm
Tony