Menu toggle

Reference Sensors

944Scott

944Scott

New member
Sooo i'm due a clutch change that I will crack on with once the bloody refurbished torque arrives for Berlyn Services (mini rant) anyway back on point I plan to change the reference sensors at the same time, am I right in thinking both sensors are the same? also I have seen widely varying prices for these, has anybody used any of the cheaper units?

I also need to change the rear crank seal and was wondering on what sealant might be helpful to use with it, any suggestions? Speaking of suggestions what else would you replace whilst doing a clutch change?


 
I used a cheaper sensor - can't remember exactly but it has been fine
They are both the same.

Top tip - plug the holes in the bellhousing when tightening the sensor bracket at the end of the job. You really don't want to drop anything in there....

I'd check the gearbox mount (although I think you've redone your rear suspension so maybe you did it then?)
 
Gearbox mount good point, it wasn't changed when I re did the suspension so I will add that to my list.
 
Mine was falling apart when I took my gearbox off. I filled it with some sort of PU mix to make a cheap semi-solid mount. :)
 
Both our 924S's now have the sensors I bought from GSF fitted without any problems-last pair £80 total in February.
 
You must log in or register to reply here.

Posts made and opinions expressed are those of the individual forum members

Use of the Forum is subject to the Terms and Conditions

Disclaimer

The opinions expressed on this site are not necessarily those of the Club, who shall have no liability in respect of them or the accuracy of the content. The Club assumes no responsibility for any effects arising from errors or omissions.

Porsche Club Great Britain gives no warranties, guarantees or assurances and makes no representations or recommendations regarding any goods or services advertised on this site. It is the responsibility of visitors to satisfy themselves that goods and/or services supplied by any advertiser are bona fide and in no instance can the Porsche Club Great Britain be held responsible.

When responding to advertisements please ensure that you satisfy yourself of any applicable call charges on numbers not prefixed by usual "landline" STD Codes. Information can be obtained from the operator or the white pages. Before giving out ANY information regarding cars, or any other items for sale, please satisfy yourself that any potential purchaser is bona fide.

Directors of the Board of Porsche Club GB, Club Office Staff, Register Secretaries and Regional Organisers are often requested by Club members to provide information on matters connected with their cars and other matters referred to in the Club Rules. Such information, advice and assistance provided by such persons is given in good faith and is based on the personal experience and knowledge of the individual concerned.

Neither Porsche Club GB, nor any of the aforementioned, shall be under any liability in respect of any such information, advice or assistance given to members. Members are advised to consult qualified specialists for information, advice and assistance on matters connected with their cars at all times.

Porsche
Lockton
Pirelli
Officially approved
Oracle Finance
WEX Esso
Collecting Cars
Archant Dialogue
Back
Top