Menu toggle

set of Fuel Injection Lines wanted for 1972 MFI

M

MJC Gulf 911

New member
Help again!

I now need a good set or a new set of fuel injection lines for my 1972 911 Hill Climb car. This will run as a 2.7ltr.
Does anyone either have a set or know where I can have a set made please?
The work to the engine is being done by Bob Watson/Canford Classics but we are missing the lines.

Thank you

Martyn
 
Can you not get these from Porsche ? Their part numbers are :-
Cylinder 1 = 911 110 021 00
Cylinder 2 = 911 110 022 00
Cylinder 3 = 911 110 023 00
Cylinder 4 = 911 110 024 01
Cylinder 5 = 911 110 025 00
Cylinder 6 = 911 110 026 00

and the clamp to hold pipes no 1,2 & 3 is = 911 110 333 00

I have seen some racers with flexible made-up pipes which I presume may be manufactured commercially, any racers out there who could help ?

 
Robin,
Thank you for that detail, which is very useful. I have sent an enquiry regarding availability to Ted Craig at Porsche Silverstone listing the numbers and enquiring about availability.

Best regards
Martyn
 
The flexible pipes are available from a number of sources. Supertec in the US certainly do them. Pretty sure they can also be sourced direct from UK - Neil Bainbridge comes to mind or if not he would certainly know where to get them.

Pretty sure the clamps were NLA but can't remember on the metal pipes themselves

Ian.
 
Try Canford Classics - they can supply most early 911 parts and offer a variable discount to club members.
 
Hello Robin,

Thank you for the detail. I spoke to Ted Craig at Porsche Silverstone, who was very helpful. Unfortunately, he advised that the Fuel lines from Porsche have apparently been unavailable for some time.

I have located a set of plastic lines but would still be interested in the metal original lines if anyone has a set.

Thank you

Martyn
 
Hello Chris,

Thank you for the suggestion. The car is with Canford Classics as Bob Watson is rebuilding the engine for me. They don't have a set of lines but thank you anyway.
Best regards

Martyn
 

ORIGINAL: MJC Gulf 911

Hello Chris,

Thank you for the suggestion. The car is with Canford Classics as Bob Watson is rebuilding the engine for me. They don't have a set of lines but thank you anyway.
Best regards

Martyn
Click to expand...
Ah, now I know who you are (or at least I know your car) I took a photo of mine parked next to yours last week. Maybe we'll bump into each other at CC sometime.
If Alan or Bob can't source them I'm guessing that nobody else in the trade will. Have you tried someone like Pirtek who make custom pipework of all descriptions? Or speak to Bosch and ask if they have a source for repro patrs.
 
Bob Watson called me this evening to say that Twin Spark Racing in Holland have the Flexible MFI RSR Fuel Lines and I have now placed an order for them. They are available in Black - which at the time of writing are on two weeks back order - and clear, which are the ones I have gone for.

Chris, thank you, yes mine is the Gulf liveried Porsche 911 and I can't wait to get out on the hills in it!

Thank you again,

Martyn.

 
You must log in or register to reply here.

Posts made and opinions expressed are those of the individual forum members

Use of the Forum is subject to the Terms and Conditions

Disclaimer

The opinions expressed on this site are not necessarily those of the Club, who shall have no liability in respect of them or the accuracy of the content. The Club assumes no responsibility for any effects arising from errors or omissions.

Porsche Club Great Britain gives no warranties, guarantees or assurances and makes no representations or recommendations regarding any goods or services advertised on this site. It is the responsibility of visitors to satisfy themselves that goods and/or services supplied by any advertiser are bona fide and in no instance can the Porsche Club Great Britain be held responsible.

When responding to advertisements please ensure that you satisfy yourself of any applicable call charges on numbers not prefixed by usual "landline" STD Codes. Information can be obtained from the operator or the white pages. Before giving out ANY information regarding cars, or any other items for sale, please satisfy yourself that any potential purchaser is bona fide.

Directors of the Board of Porsche Club GB, Club Office Staff, Register Secretaries and Regional Organisers are often requested by Club members to provide information on matters connected with their cars and other matters referred to in the Club Rules. Such information, advice and assistance provided by such persons is given in good faith and is based on the personal experience and knowledge of the individual concerned.

Neither Porsche Club GB, nor any of the aforementioned, shall be under any liability in respect of any such information, advice or assistance given to members. Members are advised to consult qualified specialists for information, advice and assistance on matters connected with their cars at all times.

Porsche
Lockton
Pirelli
Officially approved
Oracle Finance
WEX Esso
Collecting Cars
Archant Dialogue
Back
Top