stainless exhaust system 944 S2
- Thread starter cumulus7
- Start date
Diver944
Active member
You really only have two options -
1. Dansk do a stainless rear box that numerous retailers sell for around £170. I have had one for over 10 years and 80,000 miles and its still solid, shiny and looks new when polished. A few recent purchasers have had problems with quality but if you contact jmgarage.co.uk they will supply a good quality Dansk and stand by their products. There is no 'off the shelf' front pipe, but any exhaust welder can weld in a straight peice of pipe to the exhaust manifold for around £100 depending where you live
2. A custom made system from the manifold back will set you back circa £500 depending where you live. Try places like http://www.haywardandscott.com/ http://www.longlife.co.uk/ and http://www.mijexhaust.com/
1. Dansk do a stainless rear box that numerous retailers sell for around £170. I have had one for over 10 years and 80,000 miles and its still solid, shiny and looks new when polished. A few recent purchasers have had problems with quality but if you contact jmgarage.co.uk they will supply a good quality Dansk and stand by their products. There is no 'off the shelf' front pipe, but any exhaust welder can weld in a straight peice of pipe to the exhaust manifold for around £100 depending where you live
2. A custom made system from the manifold back will set you back circa £500 depending where you live. Try places like http://www.haywardandscott.com/ http://www.longlife.co.uk/ and http://www.mijexhaust.com/
andy watson
Moderator
H & S on mine, quality!
Thanks for all the replies. I bought my first 944 (a 2.7) in 99. It was a bit noisy and it seemed the rear box was on-standard ss as it was round not oval. After 6 months I changed the whole system for what I was told was a second-hand factory ss system. this was fitted and when I passed the car on in 2012 the whole lot was as solid as could be. When I sold it, the car had covered 300k miles of which 170k was on this ss system. Such work on the car I don't do myself is done at Woodward Motors just north of Bristol and one of the firms suggested is only a couple of miles from WM, so very convenient I think!
Neil Haughey
New member
The Dansk system is a bit of a no brainer. Got one on my race car as its about 1/2 the weight of the OEM exhaust, saved something like 6 or 7 Kg. My noise tests went up by about 3 or 4 dB though which in itself is not a problem as the S2 is very quiet anyway but she doesn't qualify for those rare 89 dB days at Thruxton any more.
Posts made and opinions expressed are those of the individual forum members
Use of the Forum is subject to the Terms and Conditions
