Martylennox
PCGB Member
Hi Guys and Gals,
im in the middle of refreshing the front suspension on my 996 c4s. I noticed that the bolt holes through which the top mounts attach are slotted, allowing around 10mm of movement. It this critical when re-assembling? There are marks on the paint showing a couple of different positions down through the years.
Any advice greatly appreciated.
M
im in the middle of refreshing the front suspension on my 996 c4s. I noticed that the bolt holes through which the top mounts attach are slotted, allowing around 10mm of movement. It this critical when re-assembling? There are marks on the paint showing a couple of different positions down through the years.
Any advice greatly appreciated.
M