u63af
New member
After a s*** saturday in the pissing rain under my car, I eventually fitted the tial dpw. I am just in the process of wiring in the greddy profec but was checking about the install diagram. I have looked at the tial instructions (http://www.tialmedia.com/documents/w3_tial_wginstall.pdf) and at other posts on the forum. The tial instructions refer to having a "vent" in the pipe to the top port but noone else has ever mentioned this. Do I need a vent on this pipe or do I just plumb it in the same way as that without the vent?
Cheers
Sandy
Cheers
Sandy