Wiring loom? 1966 LHD

[Guest]

Hi Guys

I need to run 2 cables out to the engine bay and have noticed some spare wires in the loom in the engine bay.

I have a Blue - Yellow - Green/White - Brown(earth I presume)

Does anyone know where theses wires from the loom will exit, will it be by the fusebox in the bonnet.

Other option is to run new cables through the tunnel, where would they exit in the engine bay?

Cheers
Rob
66 912 Us Spec

 

[Nick Moss]

Green/White - Brown is the oil level sender wiring for a 911, obviously not used on an 912, should go to the instrument panel

The yellow wire should be for the starter!

 

[Guest]

Hi Nick

Thks for the help, have managed to find the green/white behind the dash gauges and will use that.

Just need one more now, found a green and orange wire next to this but cant find it in the wiring loom in the engine bay.

thks
Rob
jersey, uk

 

[Nick Moss]

I only have 911 wiring diagrams. Green and RED is the oil pressure transmitter wire

 

[912UK]

The yellow is for starting the car from the engine bay if I remember correct, I have done this and it's very useful trick.

you need the ingnition on first might I add and have it out of gear.