Spares Listings

[Keyzy74]

In need of the twin crank sensor for an 85 944. NOT 85.5.

any help or suggestions appreciated.

 

[JamesO]

Ok dug the light out and took some pics

part number 944.631.101.08 1L8 005 730-04

 

[rav]

Wanted - 1986 944 turbo exhaust back box.

Mine has broken (mysteriously) at the connection from the tail pipe to the back box after a trip to the independent specialist.

 

[tref]

It might not be so mysteriously, and an unlucky co-incidence Rav... I have seen many, many 944 and 924 exhausts fail there. It is posible to plate the rear of the box and weld the tailpipe back on - they will last a good few extra years like that. just welding them tends to just cause the rear of the box to crack a little further away.

 

[dealdownup]

anybody out there with a blue 944s2 leather, pinstripe. logo cloth interior seats mainly
8s2 motor?
any 944 post 87 interior trimmy bits?

 

[pauljmcnulty]

any 944 post 87 interior trimmy bits?

Hi Ian,

Check out Porsche for new prices for interior trim parts. They are often cheaper than e-bay prices, and they won't be brittle old parts likely to break. []

 

[Chrishazle]

ORIGINAL: dealdownup

anybody out there with a blue 944s2 leather, pinstripe. logo cloth interior seats mainly
8s2 motor?
any 944 post 87 interior trimmy bits?

I have a pair of blue coupe sun visors in very good condition surplus to requirements - bought in error, no good for my cabriolet!

 

[sulzeruk]

Hi all, have some 944 parts for sale:
Pair of 944 S cams in perfect nick with no chipped teeth or wear £100
A bag of rocker cover mounting bolts £2.50 each
Headlight units including good level adjustment motors £40 each
AFM from a 944 S. £30
Throttle position switch for an S £10
Heater control panel for non AC cars without the climate control (Lux/S/S2) £50
Various other parts available
2 good rear brake calipers with nearly new pads. £70
Alasdair

 

[j4mou]

WANTED:

has anyone got a pair of 1986 alloy wishbones with good balljoints I would need assurance that the ball joints were good though as mine have failed.

James

 

[steve 944t]

Due to some nice new shiny bits, I have a couple of items recently removed from my Turbo:
Dump valve (recirculating) - standard Bosch 993 Turbo item, part number 993.110.337.50. Been on my car for about 7 years. A good replacement for the standard 944 T item. £12 including postage NOW SOLD

Also a boost enhancer (not sure whether Lindsey or Promax), was already fitted to my car when I bought it 8 years ago. £17 including postage. NOW SOLD

I also have a never-fitted Brey Krause fire extinguisher mount. Bought a few years ago from Porscheshop as it was a condition of my insurance for trackdays, but never quite got round to fitting it [8|]. Still in original wrapping with instructions, etc. £30 including postage.

Pictures available of all the above.

 

[TTM]

Looking for the pressure valve that sits at the back on the 8V head.

This shows the earlier style :

This shows the latest style :

The piston in it should slide freely, with very little effort.

 

[pauly]

ORIGINAL: steve 944t

Due to some nice new shiny bits, I have a couple of items recently removed from my Turbo:
Dump valve (recirculating) - standard Bosch 993 Turbo item, part number 993.110.337.50. Been on my car for about 7 years. A good replacement for the standard 944 T item. £12 including postage

Hi, was it new 7 years ago ?.

 

[steve 944t]

ORIGINAL: pauly

ORIGINAL: steve 944t

Due to some nice new shiny bits, I have a couple of items recently removed from my Turbo:
Dump valve (recirculating) - standard Bosch 993 Turbo item, part number 993.110.337.50. Been on my car for about 7 years. A good replacement for the standard 944 T item. £12 including postage

Hi, was it new 7 years ago ?.

Sure was. Bought from OPC Guildford on 24th March 2004 []

 

[pauly]

Guessing you replaced it with a Forge 007, did that make much difference ?.

 

[steve 944t]

ORIGINAL: pauly

Guessing you replaced it with a Forge 007, did that make much difference ?.

Can't really comment I'm afraid - I noticed a definite improvement when I replaced the original DV but I also replaced all the vacuum lines at the same time, so hard to tell exactly what effect the DV had. I have now fitted a Promax level 2 kit, including a new DV. There is certainly a noticeable difference now []

 

[George Elliott]

Steve, when you write to santa remember to ask him to include a Head gasket[8|]

Kit = DPW, 3Bar FPR, DV, Chip set?

L2 Promax kit transformed my car some years back. Helpful outfit too.

Good luck
George
944t

 

[billus99]

any one got a set of 16" D90s, lurking in the garage? ideally with boots on!?

 

[Asiangunner]

Any new or new ish starter motors for a 1983 944 Lux?

Also this is a bit of a odd request.... i'm looking for the pipe which supplies the drivers side air vent

Please pm if you have either, thanks

 

[Elliot]

ORIGINAL: billus99

any one got a set of 16" D90s, lurking in the garage? ideally with boots on!?

i have a set of 7 1/2 and 9 inch turbo D90s with Bridgestones on that came as spares with my recent 1990 944 T purchase if your interested

 

[sulzeruk]

I have a minty mint heater control unit from a turbo for sale. All buttons and knobs are perfect with no wear at all. All functions work perfectly. £75 delivered.
Alasdair